Marble originating from Italy.
Beige coloured with some delicate green blue to red veins.
The grain is very fine and hard. The colour variation is minimal from batch to batch.
Weight - 2.670 kg/m3
Wear Resistance - 22.70 mm
Tensile Strength - 155 kg/cm2
This natural stone is suitable for internal and external use: floor, wall, vanity tops and stair covering in both private housing and in public buildings with moderate and intensive collective use. The stone material and the stone finish should be selected to suit the area it is being applied to.
Honed, Polished, Brushed, Sand blasted, Acid washed
Standard tiles sizes, cut to size and bespoke.
Slabs 20mm and 30mm
For flooring it is advisable to use a dry micro fiber mop where possible, to reduce the risk of scratching.
When wet washing always use an acid-free product! Allow the floor to dry thoroughly during the first 3 to 6 months. During this period it is important to use only a small amount of water to mop the floor and allow the surplus moisture to evaporate from the tiles; also use a product that does not seal the pores of the stone (e.g. Lithofin MN Easy Care Cleaner). This product is always added to the wash water and can be used for future regular cleaning.
When the finished surface is completely dry, sensitive areas can be protected with a suitable sealer
(e.g. Lithofin MN Stain Stop).